User's Manual

Automation and Drives - SCE
T I A Training Document Page 31 of 129 Module
F6
Issued: 02/2008 Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Projekt HMI Station WinCC flexible Project Messages Recipes User Management
4.5.7 Mixer Motion FB25
This block is necessary to simulate the mixer motion. When the mixer motor is in operation, a count
in 150ms cycles, of the value 0 to 12 is incremented.
4.5.8 Automatic and Manual Lamps
In the last FB1 network, assignments for the automatic and manual lamps are generated.
FB1 is now completed.
Save and Close FB1.
Simulate mixer motion
Assign authomatic and manual lamp