User's Manual

Automation and Drives - SCE
T I A Training Document Page 6 of 129 Module
F6
Issued: 02/2008 Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
1. PREFACE
In terms of its contents, Module F6 is part of the teaching unit entitled 'Process Visualization’.
Learning Objective:
In Module F6, the reader is introduced to the essential functions of the software WinCC flexible
2005.
Typical task definitions are processed using a sample system.
• Installing the software
• Steps for generating a Step7 project
• Inserting an HMI station
• Interface of WinCC flexible
• Configuring display and operator objects
• Configuring messages
• Generating recipe management
• Setting up user management
Prerequisites:
• Knowledge in handling Windows
• Fundamentals of PLC programming with STEP 7 (for example, Module A3 - 'Startup’
PLC Programming with STEP 7)
Fundamentals of
STEP7 Programming
2 to 3 da
y
s Modules A
Industrial Fieldbus
Systems
2 to 3 da
y
s Modules
Additional Functions of
STEP7 Programming
2
to
3
days
M
odu
l
es
B
Process
Visualization
2 to 3 da
y
s Modules
Programming
Languages
2to3days
Module
s
C
IT Communication
wirh SIMATIC S7
2 to 3 days Module
s
E
Plant Simulation with
SIMIT SCE
1 to 2 days Modules G
Frequency Converter
on SIMATIC S7
2 to 3 da
y
s Modules