User's Manual

Automation and Drives - SCE
T I A Training Document Page 7 of 129 Module
F6
Issued: 02/2008 Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
Hardware and software required
1 PC, operating system Windows 2000 SP4 or Windows XP Professional SP1 and SP2 with MS
Internet Explorer V6.0 SP1
Pentium IV with 1.6 GHz, 512MB RAM, approx. 1.5GB free hard disk storage
2 Software STEP7 V 5.4
3 Configuring software WinCC flexible 2005 Advanced
4 MPI interface for the PC (for example, PC Adapter USB)
5 Sample configuration for PLC SIMATIC S7-300:
- Power supply: PS 307 2A
- CPU: CPU 314
- Digital inputs: DI 16x DC 24V
- Digital outputs: DO 16x DC 24V/0.5A
6 Touch Panel TP177B
7 MPI or Profibus DP data cable for connecting the TP177B to the controller
1 PC
3 Configuring Software WinCC
flexible 2005 Advanced
2 STEP7 V5.3
5 SIMATIC S7-300
4 PC Adapter
6 Touch Panel TP177B
7 MPI or Profibus DP
Data Cable