User's Manual

Automation and Drives - SCE

T I A Training Document Page 72 of 129 Module

Issued: 02/2008 Operator Control with WinCC flexible 2005

Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management

8 DISPLAY AND OPERATOR OBJECTS IN THE PROJECT "COLOR MIXING PLANT“

8.1 Configuring Display and Operator Objects in the Picture“Tank1“

First, a bar, two sliders (linear regulators), and two buttons are configured.

8.1.1 Configuring the Bar Display

To display the current level of Tank1, we configure a bar.

Drag a bar into the picture Tank1.