User's Manual

Automation and Drives - SCE
T I A Training Document Page 77 of 129 Module
F6
Issued: 02/2008 Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
At Design, enter “MIN“ for labeling.
At Representation, change the position and the size of the slider.
At text, change the font size.
Insert a second slider for setting the maximum level in Tank1. Change the Minimum Value to 550,
the Maximum Value to 990, and select the variable “high_level“ as process variable from the FB call
“tank1“ of DB1.
For labeling, enter “MAX“ at Design.
Position the slider on X244 and Y32 and change the size to 64 x 152.
Finally, change the font size at Text.