User's Manual

Automation and Drives - SCE
T I A Training Document Page 85 of 129 Module
F6
Issued: 02/2008 Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
Under Animation, activate Style and use the variable “ZULAUF_T1“ (Inflow T1).
Set the Type to Bit 0, and at Value 1, change the background color to Red.
Copy and insert the polygon. Rotate the polygon by 90 degrees and position it below the tank (the
button for rotating by 90 degrees is in the symbol bar above).
Use the variable “ABLAUF_T1“ (Outflow T1) for the color change in Style.
Don’t forget to save!