User's Manual

Automation and Drives - SCE
T I A Training Document Page 92 of 129 Module
F6
Issued: 02/2008 Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
Generating a Text List
In the project window, double click on Text Lists in the folder “Text and Graphic Lists“.
In the column Name, double click on the first line, and create a new text list in this way.
Change the name of the text list to “Motor text“.
At Auswahl (selection), select “Range (0-…)“.
Below at Value 0, enter the text “Motor aus“ (motor off), and at Value 1 the text “Motor ein“ (motor
on).