User's Manual

Process I/O
ET 200M distributed I/O
Bundles
11/13
Siemens ST PCS 7 · November 2007
11
■ Overview
The following preassembled bundles are available for the
ET 200M:
• I/O subsystem for ET 200M stations with up to 8 I/O modules
suitable for hot swapping, comprising:
- DIN rail for active bus modules, 482 mm long (19 inches)
- PS/IM bus module
- PROFIBUS DP IM 153-2 High Feature interface module
• I/O subsystem Extended for ET 200M stations with up to
12 I/O modules suitable for hot swapping, comprising:
- DIN rail for active bus modules, 630 mm long
- PS/IM bus module
- PROFIBUS DP IM 153-2 High Feature interface module
• IM 153 redundancy bundle
for operation of the ET 200M on the AS 412H / AS 414H /
AS 417H fault-tolerant automation system, comprising:
- 2 PROFIBUS DP IM 153-2 High Feature interface modules
- 1 IM/IM active bus module
B) Subject to export regulations: AL: N, ECCN: EAR99H
■ Selection and Ordering Data Order No.
I/O subsystem for ET 200M
for ET 200M stations with up to
8 I/O modules, suitable for hot
swapping, comprising:
• DIN rail for active bus modules,
482 mm long (19 inches)
• PS/IM bus module
• PROFIBUS DP IM 153-2 High
Feature interface module
6ES7 654-0XX08-1XA0 B)
I/O subsystem extended for
ET 200M
for ET 200M stations with up to
12 I/O modules, suitable for hot
swapping, comprising:
• DIN rail for active bus modules,
630 mm long
• PS/IM bus module
• PROFIBUS DP IM 153-2 High
Feature interface module
6ES7 654-0XX08-1XB0 B)
IM 153 redundancy bundle
for operation of a ET 200M station
on the AS 412H, AS 414H or
AS 417H fault-tolerant automa-
tion system, comprising:
• 2 PROFIBUS DP IM 153-2 High
Feature interface modules
• 1 IM/IM active bus module
6ES7 153-2AR03-0XA0 B)
© Siemens AG 2007