User Manual

EPD - Type II
According to ISO 14021
WFK40.D110 CD SD PLUS Q3 2,5 Cold water L= 110mm
WFW40.D110 CD SD PLUS Q3 2,5 Warm water L= 110mm
WFK40.E130 CD SD PLUS Q3 4 Cold water L= 130mm
WFW40.E130 CD SD PLUS Q3 4 Warm water L= 130mm
WFK40.D080 CD SD PLUS Q3 2,5 Cold water L= 80mm
WFW40.D080 CD SD PLUS Q32.5 Warm Water l=80mm
WFZ44 Pulse sensor
WFZ43 Namur pulse sensor
Product line
Siemens Switzerland Ltd
Building Technologies Division
Gubelstrasse 22
CH-6300 Zug
Management System since by
ISO 9001 (Quality) 22.07.1986 SQS
ISO 14001 (Environment) 20.10.1998 SQS
OHSAS 18001
(
OH&S
)
01.01.2011 SQS
Mechanical water meters
Environmental
Product Declaration
Type of equipment /
Product No.
Product
Environmentall
y
compatible
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the
Maintenance
Fire protection according to
Fire load variant *) see below
20-PAP Corrugated fiber board carton box variant
5-PP plastic bag variant
22-PAP paper mounting instruction WFZ… variant
Notes on dis
p
osal
Total weight of device variant *) see below
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PP; halogen-free vane wheel variant
POM; halogen-free filter variant
PA66; GF 30%; halogen-free pressure plate variant
POM; GB 10%; halogen-free vane wheel bearing variant
EPDM; halogen-free O-ring variant
ABS; halogenated emitter case variant
POM; halogen-free register variant
POM; halogen-free Cover variant
CuZnPb body variant
Steel stainless upper pivot 1g
Steel stainless lower pivot 1g
FR4; halogenated; solder SnAgCu sensor PCB variant
no carton box on
p
ulse emitters
According maintenance record stated by DPR 12-01-98 n° 37
A
ccordin
g
maintenance record stated b
y
DPR 12-01-98 n° 37
DDR 12-01-1998 n° 37
product design
environmental impact of its products with respect to production, procurement, sales, use, services and disposal during the
product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350) "Specifications on
Environmentally Compatible Product and System Design".
Metals
Plastics
Risk of fire
no energy consumption
Materials
Packaging
PCBAs (Printed Circuit Board
assembled)
Page 1/2