Environmental Declaration

EPD - Type II
Based on ISO 14021
Building Parts
*Variant parts list
[g]
Total weight of device
Hydraulics FVM5500
Comments
A5W00146668A-AA-001 20.01.2021
S55560-F117
387
S55560-F119
387
294
S55560-F116
342
249 294 249
S55560-F118
342
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive, including the 4 phthalates added to Annex
II in 2015.
The device contains the following substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the
Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0.1 % w/w. Contained REACH candidate substances,
including those which will become known at a later date, are listed on the delivery note.
1,2-Dimethoxyethan; Ethylenglycoldimethylether (EGDME), CAS-Nr.110-71-4; Lead, CAS-Nr.7439-92-1
(Status according to the creation date of this document.)
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
QUNDIS GmbH therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
Regulation (EC) No. 1907/2006 (REACH)
The device is low-halogen with exception of:
PCB
The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. Regarding disposal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.
Disposal
Restricted Page 2/2