© Siemens AG 2013 LOGO! App V1.0.0 LOGO! Manual Edition 03/2013 Answers for industry.
© Siemens AG 2013 LOGO! App from Siemens The free of charge LOGO! App enables you to monitor actual process values of your LOGO! 0BA7 application with a smart phone or a tablet PC via WLAN or Internet. It allows to switch digital signal and adjust analogue values or timer settings. Supported will be the WLAN connection to a LOGO! 0BA7 basic module via IP address typically or DynDNSnames which are used in the Internet. With your LOGO! App you can ... ... define customised names.
© Siemens AG 2013 LOGO! App from Siemens With LOGO! App you can ... ... display and modify configured values in tabular form. Preconfigured values of the LOGO! program like parameters of function blocks or network inputs and outputs can be shown as table and the value can be changed. Table of preconfigured values including names ... display configured values as a diagram. Up to five of the configured values can be marked in the table shown graphically in a trend view.
© Siemens AG 2013 LOGO! App from Siemens Features ■ Connection via IP-Address and DynDNS-name Supports connection via Internet without fixed IP-Address ■ User specific names for devices and values Simple recognition ■ Read and set date and time in LOGO! and synchronization with date and time of the mobile device ■ Show configured values in status table or trend view ■ Read Diagnostic information Without program changes in LOGO! Step by step to success 1 Download of the Siemens LOGO! App Please
© Siemens AG 2013 LOGO! App from Siemens 2 Device configuration ■ The LOGO! App supports connection via IP-Address and via DynDNS-name. If you want to use Internet then you have to enable Portforwarding for Port 10001. ■ In addition to the physical address you can give a user specific name for the target device for simple recognition. ■ A special configuration in the LOGO! program is not necessary. Select kind of used connection Select a Target device 1.
© Siemens AG 2013 LOGO! App from Siemens 3 Check the connection ■ The simplest way to check the connection is to read the firmware version of the connected LOGO! 0BA7. ■ A special configuration in the LOGO! program is not necessary. Firmware version 1. Select Menu „Show FW Version“. 2.
© Siemens AG 2013 LOGO! App from Siemens 4 ■ Read and Set date and time A special configuration in the LOGO! program is not necessary. Read and Set date and time 1. Select the menu „Set Clock“ in the main menu. 7. Note: Change RUN/STOP mode in LOGO! (LOGO! must be in STOP mode). 2. Select date or time for manual changes. 8. Note: Result of the transfer. 3. Button Read to read and show the actual date and time of the connected LOGO!. 4.
© Siemens AG 2013 LOGO! App from Siemens 5 ■ Show status information of the connected LOGO! 6 Show program specific Data/Parameter of the connected LOGO! A special configuration in the LOGO! program is not necessary. 1. In the main menu select „I/O Status Monitor “.. 1. In main menu select „VM Table Monitor “. 2. Display of the LOGO! status table. 2. Button to add data or parameters. 3. Button to modify the shown status information and the update time. 4.
© Siemens AG 2013 LOGO! App from Siemens 7 Edit values 8 Show values in trend view 1. Select one of the specified values by long click on the value. 1. Select up to 5 values from the VM Table Monitor by a long click on the value. 2. Select „Edit This Value“ in the sub menu. 2. Select „Add To Chart“ from the sub menu. 3. Change the value in the field „New Value“. 3. The selected values to be shown in the trend view will get marked in blue color. 4.
© Siemens AG 2013 LOGO! App from Siemens 9 Configuration of values in the LOGO! Application program with LOGO! Soft Comfort 1. Digital value in LOGO! Read and Write (Network Input). 2. Analog value in LOGO! Read and Write (Analog Network Input). 1 1 2 3. Analog value (FB-Parameter) Read only (Actual value in LOGO!). 2 3 4. Analog value (FB-Parameter) Read and Write. 4 5. Analog value (FB-Parameter) Read only (Reference in LOGO! Programm).