User Manual

en Additional programme settings
20
\ Additional programme
settings
Additional programme settings An overview of all additional settings,
which can be selected depending on
the programme, can be found from
~ Page 15.
ecoPerfect ¦
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
ecoPerfect ¦ setting.
speedPerfect G
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the speedPerfect G setting.
Note: Do not exceed the maximum
load.
Overview of programmes ~ Page 15
Less Ironing
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note: The washing's residual moisture
is increased.
Rinse Plus
Additional rinse cycle for particularly
sensitive skin and/or for areas with very
soft water.
1 Operating the
appliance
Operating the appliance Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~ Page 35.
1. Connect the mains plug.
2. Turn on the tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons programme set at the
factory is then always displayed.
You can use this programme or select a
different programme. The programme
selector can be turned in either
direction.
Note: If you have activated the
childproof lock, you must deactivate it
before you can set a different
programme. ~ Page 23
The indicator lamp on the programme
selector lights up and the default
programme settings for the selected
programme appear in the display panel:
■ Temperature
■ Spin speed and