INSTRUCTION MANUAL Steam Vortex SSM-0418
CONTENTS IMPORTANT SAFEGUARDS................................................................1 KEY FEATURES OF STEAM VORTEX....................................................2 DESCRIPTION................................................................................2 INSTRUCTIONS FOR USE................................................................3 HOW TO ASSEMBLE AND USE........................................................3-5 INSTRUCTIONS FOR USE OF CARPET GLIDER ACCESSORY...................
IMPORTANT SAFEGUARDS When using an electric appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS STEAM CLEANER WARNING: DANGER OF SCALDING To reduce the risk of fire, electric shock, or injury: ! This product is designed for domestic use only. ! Do not use outdoors. ! Do not leave steamer unattended while turned on. Unplug the electrical cord when not in use and before servicing. ! Do not allow the steam mop to be used as a toy.
KEY FEATURES OF STEAM VORTEX A. STEAMER HANDLE B. TRIGGER C. QUICK RELEASE CORD WRAP D. CARRY HANDLE E. WATER TANK F. FILTER G. STEAMER BODY H. LED I. LOWER CORD WRAP J. POWER CORD K. STEAMER HEAD L. CLOTH PAD M. CARPET GLIDER(OPTIONAL ACCESSORY) The following information is provided for service by a qualified electrician only: Rated voltage: 110~120V, 60HZ, 1500W This appliance must be grounded.
INSTRUCTIONS FOR USE The Steamer is designed to thoroughly clean floor surfaces, such as marble, ceramic, stone, linoleum, sealed hard wood floors and parquet. WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE WAX MAY BE REMOVED BY THE HEAT AND STEAM ACTION. DO NOT USE ON UNSEALED WOOD FLOORS OR LET UNIT STAND ON ANY WOOD FLOOR FOR AN EXTENDED PERIOD OF TIME. THIS COULD CAUSE THE WOOD GRAIN TO RISE. IT IS THEREFORE RECOMMENDED THAT A SAMPLE CLEANSING BE CARRIED OUT ON AN ISOLATED AREA OF THE FLOOR.
)Remove Water tank by lifting straight up and away from the unit. Unscrew the water tank cap and remove the insert assembly. Fill with cool tap water, and replace the insert assembly tightening the cap. Place the Water Tank on the unit. 7) Twist the Quick Release Cord Wrap clockwise to unwrap the Power Cord completely and plug into a grounded outlet. 8) The LED will illuminate when the steamer is connected to power socket. Please wait for 20 seconds (heat up period) before pressing trigger.
WARNING: NEVER RUN THE STEAMER WITHOUT WATER. NEVER DIRECT STEAM AT ANY PERSON OR ANIMAL. USE STEAMER ON SEALED HARD FLOOR ONLY. 10) When steamer stops emitting steam, after approximately 20 minutes of use, simply remove the Water tank, refill, and continue cleaning. 11) When you finish your cleaning, unplug Power cord from outlet, empty the Water tank, carefully remove the Cloth Pad from Steamer Head, wind Power Cord around the Cord Wrap and store it upright in a dry area or hang by the storage hook.
CLEANING AND MAINTENANCE CAUTION: PRIOR TO CLEANING OR MAINTENANCE ISOLATE THE UNIT BY REMOVING THE CORD FROM THE POWER SOCKET. DO NOT IMMERSE THE UNIT IN WATER. 1) The micro fibre cloth can be machine washed in hot water and tumbled dry. 2) Wipe the steamer with a soft cloth.
ONE YEAR LIMITED WARRANTY Warranty: This product warranty extends only to the original consumer purchaser of the product. This product is warranted by the manufacturer to be free from all defects in materials or workmanship for a period of one year from the date of original purchase. This warranty is subject to the following conditions, exclusions and exceptions.
Consumer Service will give you further instructions for returning a defective product for repair or replacement. When returning a defective product, carefully pack the item to avoid damage in shipping. the manufacturer cannot assume responsibility for loss or damage during incoming shipment. We recommend that you insure the package, as damage in shipping including the shipping cost is not covered by this warranty.
