Operation Manual

6
11) When steamer stops emitting steam, after approximately 15 to 20 minutes of use,
simply remove the water tank, refill, and continue cleaning.
WARNING: NEVER RUN THE STEAMER WITHOUT WATER.
12) When you finish cleaning, unplug power cord from outlet. Be sure to empty water
tank and carefully remove cloth pad from steamer head. Store the unit upright in a dry
area or hang it by the storage hook.
CAUTION: The cloth pad may be very hot.
Carpet Glider
13) Lay carpet glider on the floor in an upright position with the triangular flat surface
facing downward. Place steam mop head on top of glider as illustrated below.
IMPORTANT: The carpet glider is not designed to be fixed to the floor head for safety
reasons including preventing burns. It is designed for use on soft carpet areas only, not
for hard floor surfaces.
CLEANING AND MAINTENANCE
CAUTION: Prior to cleaning or maintaining your steam mop, isolate the
unit by removing the cord from the power socket and avoid immersing the
unit in water.
1) The microfiber cloth pads can be machine washed in hot water and tumble dry. Do
not use bleach or fabric softener. Allow to dry fully before use.
2) Wipe steamer with soft cloth when/if necessary.
Product Specs:
Voltage supply: 120, 60 Hz
Output: 1500 W
Water tank capacity: max. 18.90 fl oz.
Cord: 16.4 ft.
Weight: 6.6 lbs.
Protection class: 1