Specifications

10
142 SIERRA ST., EL SEGUNDO, CA 90245 [phone] FAX [phone] www.ESE-WEB.com
“PC” CARD
DISTRIBUTION AMPLIFIERS
ESE’s family of Distribution Amplifiers includes three 1 x 4 “PC” Card DA’s. These products
are designed to plug into any computer with PC/compatible expansion slots (ISA). The
boards are half card size and require no additional power (other than that provided by
the computer).
If space and convenience are considerations, these “PC” cards provide exactly that,
another practical solution from ESE.
Features:
• Gain & EQ Controls
• Desk Top Editing Systems
• Computer Based Systems
• Audio And/Or Video Distribution
• RCA Input And Output Connectors (PC-217ISA)
• BNC Input And Output Connectors (PC-207ISA & PC-237ISA)
PC-207ISA
Video DA
The PC-207A is a 1 x 4 Video
Distribution Amplifier designed
for use in most video systems. This
“PC Product” is the ideal choice
when distributing a video signal
to more than one monitor or VCR.
Also, the PC-207ISA provides a
perfect method to compensate
for lengthy cable runs.
The PC-207ISA provides a single
input and four isolated outputs
via the BNC connectors on the
rear card guide bracket & offers
a power bandwidth of 10MHz; +/-
1dB. Gain and Equalization controls
are also provided. Specifications
are equivalent the those of the
ES-207A (see page 7).
PC-217ISA
Audio DA
The PC-217ISA is a 1 x 4 Audio
Distribution Amplifier. The unit
receives a single unbalanced
audio input and creates four
identical copies. Inputs and
outputs are accessible via RCA
connectors on the rear card
guide bracket. The output level
(Gain control) of the PC-217ISA
is adjustable and each output is
completely isolated.
This “PC-Card” product is a must
when sending an audio signal
or time code (such as SMPTE or
IRIG) to multiple sources or along
lengthy cables. Specifications are
equivalent to those described in
the Audio section of the ES-2940
(see page 5).
PC-237ISA
High-Resolution Video DA
The PC-237ISA is a 1 x 4 Video
Distribution Amplifier. The unit offers
a wide power bandwidth of 100
MHz; +/-1dB (120MHz; +/-3dB) and
provides an excellent, low cost
solution to the most demanding
video requirements. It is designed
for use in high resolution video
systems including graphics, HDTV,
composite video and medical
imaging.
The PC-237ISA provides a single
input and four outputs via the BNC
connectors on the rear card guide
bracket. The Gain control and an
optional Equalization control are
board mounted. Specifications
are equivalent to those of the
ES-237 (see page 9).