Manual

Global Positioning System (GPS)
Rev 3.0B Feb.08 88
Local Host
TosetthePinPointXtoreporttoalocalhost,onedirectly
connectedtotheserialport,configuretheporttobeusedwith
S53‐DestinationPort.ThelocalIPaddresswillautomatically
beusedforlocalreports.S53,inAceManager,ispartofthe
Miscgroup.
Figure 10-3: AceManager : Misc - S53 Port
Ifyouneedtosendreportstoadditionallocalports,youcan
specifyotherportswith*PPLATSEXTRA.LocalReportscanbe 
senttoupto7additionalportsconsecutivelyfollowingtheS53
port.IfS53=1000and*PPLATSEXTRA=4,reportswillbesent
to1000,1001,1002,1003,and1004.InPPLATSEXTRA,
specify
thenumberofportswhereyouwantthereportssent,0to7(0
disablesextraports).
Figure 10-4: AceManager : PinPoint - *PPLATSEXTRA
TCP GPS Report Polling
ThePinPointXcaneasilyandquicklybepolledforlocationby
openingaTCPconnectiontoport9494(default).Oncethe
connectionisestablished,thePinPointXwillsendareport
withthecurrentpositionusingthe GPSreporttypethe
modemisconfiguredtouse.
YoucanchangetheportfortheTCPGPSpollusing
*PPTCPPOLL.