Manual

Global Positioning System (GPS)
Rev 3.0B Feb.08 93
Flush on Event
Ifyouhaveeventsenabled,with*PPFLUSHONEVT,youcan
configurethePinPointXtoflushtheSnFbufferwhenanevent
occurs.ThiswillimmediatelysendallpendingSnFmessages
tothehost.Thisallowsanevent,suchasavehiclebeing
poweredonoratowbaractivated,to
beimmediatelysent,so
itscausecanbeactedonwithoutdelay.
Figure 10-13: AceManager : *PPFLUSHONEVT
Note: Outstanding packets can include messages already sent to the
server that haven’t been acknowledged (SnF Reliable Mode) whether
they have been received by the server or not.
RAP Configuration
RAPhasadditionalfeatureswhichallowreportsbasedon
externalphysicalevents,inputfroma3rdpartydevices,store
andforwardprocessing,etc.
InadditiontobeingabletoconfigureyourPinPointXusing
AceManagerorATcommands,mostoftheconfiguration
settingsforRAPcanalsobechangedwiththeRAPconfigu
‐
rationcommandmessagesentbytheAVLhost.
RAP Reports Over-The-Air (Remote)
ToconfigureyourPinPoint XtosendRAPreportstoaremote
AVLhostserver,youwillneedtoset3commands:*PPIP,
*PPPORT,and*PPGPSR.
a. SettheIPaddressofthehostwith*PPIPanddesired
portonthehostwith*PPPORT.
Figure 10-14: AceManager : PinPoint - *PPIP, *PPPORT
b. SettheGPSReportType,using*PPGPSR,toyour
preferredRAPreporttype.
11‐GPS‐GlobalPositioningSystemdata