Manual

Hardware Installation of the PinPoint X
Rev 3.0B Feb.08 26
• TheResetbutton(ontheleftsideofthePinPointX)has
twofunctions.Ifitisquicklydepressedandreleased,the
modemwillsimplypowercycletheinternalhardware.If,
however, theresetisdepressedandheldforseveral
seconds(count10slowly,andwaitforthepowerlight
to
gooffafterthelightpatternstops),theALEOSconfigu
‐
rationsettingswillreturntothefactorydefaults.
Light Patterns
TheLEDsonthefrontofthemodemwillrespondindifferent
patternstoindicatemodemstates.
• Normal‐EachLED,mentionedabove,litasapplicable.
• Startup‐TheLEDswillcyclefromlefttoright.
• PassThrumode‐NetworkandSignalLEDswillblinkin
tandem.TheActivityLEDwillblinkwhentran smittingor
receivingdata.
• SOS‐TheNetworkChanandServiceErrorServLEDs
willblinkalternatetoeachother.
• LowPower‐AllLEDswillbeoffexceptthepowerLED
whichwillblinkevery3seconds.
• ConfigurationReset‐TheLEDswillcyclelefttorightand
thenrighttoleft4times.
• AuthenticationFailure‐TheNetwork,Signal,and
ActivityLEDsblinkevery2seconds.
• DataRetry‐TheNetwork,Signal,andActi vityLEDsblink
every3seconds.
• InvalidMACAddressorEthernet InitiationFail‐The
ServiceLEDwillblink.
Mounting
Theintegratedmountingwithkeyholescrewmountsonthe
PinPointXwillallowyoutosecureyourmodemnearly
anywhere,quicklyandeasily,withouttheneedforaseparate
bracket.
Caution: If you reset the modem configuration using the reset button,
you may to reconfigure your APN.