User's Guide

Rev 1 May.11 17
2
2: Use Your Mobile Hotspot
This chapter provides information on how to use your Mobile Hotspot.
Connect other wireless devices
You can connect up to 5 wireless devices such as a cell phone, digital
camera, printer, gaming console, or digital picture frame to your
Mobile Hotspot network.
To connect a wireless device:
1. On your wireless device, view the list of available Wi-Fi networks.
2. Connect to the network that corresponds to your Mobile Hotspot
network, as displayed on the LCD.
3. When prompted, enter the Wi-Fi Key for your Mobile Hotspot
network. The Wi-Fi Key is displayed on the Mobile Hotspot LCD
screen and Dashboard. If the screen has turned off to save
power, press and quickly release the Power button to reactivate
the screen.
Set audio alerts
You can configure your Mobile Hotspot to sound an alert when the
status changes. For example:
• When the connection status changes
• When you receive an SMS message (Depending on your service
provider, SMS messages may not be supported.)
• When the battery is low
• When the Mobile Hotspot enters or leaves standby mode
To turn off all audio alerts:
1. Turn the mute switch on the side of the Mobile Hotspot off. (The
red rectangle is visible.)
To choose which changes in status are accompanied by an audio
alert:
1. Go to the Mobile Hotspot Homepage and log in as Administrator.
(See Homepage on page 14.)
2. Click the Speaker icon and change the settings. For more infor-
mation, click the
Help icon.