User's Guide
Table Of Contents
- 1: Get Started
- 2: Use Your Mobile Hotspot
- Set Auto Connect and Network Options
- View Data Usage
- Select a Language
- Enable / Disable Wi-Fi
- View / Block Connected Users
- Add a Wireless Device to your Wi-Fi Network
- View Messages / Alerts
- Use the GPS Feature
- Battery Settings
- Set Audio Alerts
- Change Device Security Settings
- View Details About Your Mobile Hotspot
- Contact Rogers
- Use the microSD Card to Share Files over Wi-Fi
- Recharge the Battery
- 3: Advanced Settings
- Show Help for Advanced Settings
- Do not Automatically Install Driver for USB Tethering
- Export / Import Router Options
- Set Display Options
- Lock or Unlock Device Keys
- View WAN Information
- Set Connection Preferences
- Enable SIM Security
- View Wi-Fi Status and List of Connected Devices
- Set Wi-Fi Network Options
- Set Wi-Fi Security Options
- Set MAC Filter Mode
- Enable Port Forwarding
- Enable Port Filtering
- Enable VPN Passthrough
- Enable DMZ
- Enable Universal Plug and Play
- Set Router LAN Options
- 4: Frequently Asked Questions
- 5: Troubleshooting
- 6: Specifications
- 7: Regulatory and Safety Information
AirCard 763S Mobile Hotspot User Guide
40
3. Click Save.
Do not Automatically Install Driver for
USB Tethering
By default, a host driver is installed the first time you connect your mobile hotspot
to the computer via the USB cable. This driver enables the mobile hotspot to
connect to the Internet when it is tethered to a USB port on the computer via the
USB cable instead of using the Wi-Fi network.
If you do not want to use this feature and want to use the USB cable only to
charge the mobile hotspot battery, you can set the host driver not to install.
To set the host driver not to install:
1. On to the homepage, click the Advanced Settings icon ( ).
2. On the Device > Basic tab, beside Automatically install host driver for USB
tethering, select No.