User's Manual

AirCard 700 Series Installation Guide
18 2130204CEFCC
Installation on Windows 98,
2000, and Me
Note: Users of Windows 2000
must be logged in with adminis-
trative privileges.
Note: You may require your Windows CD. Ensure you have the CD
before proceeding.
1. If the AirCard CD is not already in your CD-ROM drive,
insert it. The CD should autostart and display a menu.
· If the CD does not autostart, select Start > Run and enter
d:\launch.exe where d is the drive letter of your CD-ROM
drive.
2. From the CD start-up menu, select notebook installation and
documentation
and then notebook software installation to
launch the installer.
3. Click Yes to accept the terms of the license agreement and
proceed with the installation. (If you do not agree to the
terms, click
No to cancel the installation.)
Note: The installer runs twice—
once to install Watcher and once
to install the Network Adapter
Manager.
4. Use the Next and Back buttons to navigate through the
installer.
Using the default settings for the Destination Location and
Program Folder is recommended unless you have special
requirements and an advanced understanding of PC con-
figuration.
5. If you are using Windows 2000, the Digital Signature Not
Found
window may appear. Click Yes each time the
window appears. (The warning can be safely ignored.)
6. When prompted to insert the AirCard, click OK. If the SIM
is not inserted, insert it. (See page 13.) If the antenna is not
attached, attach it. (See page 15.) With the label facing up,
insert the AirCard into your PC Card slot:
Note: Do not forcefully insert the
AirCard. This may damage
connector pins. If you have more
than one PC Card slot, you may
obtain better signal strength
using the top slot.
Figure 3-1: Inserting the AirCard