User's Manual
Table Of Contents
- Table of Contents
- Get Started
- Device Basics
- Your Network Connection
- Browser Interface Home Page
- Home Page Basics
- Home Page Buttons
- Icons and Text
- Signal Information
- Mobile Broadband Information and Settings
- Roaming Information and Settings
- Alert Information
- GPS Information and Settings
- Wi-Fi Users Information and Settings
- Battery Information and Settings
- Internet Connection Information
- microSD Card Information and Settings
- Sounds Information and Settings
- Alerts
- Viewing Device Information
- Updates
- Device Settings
- Power Settings
- Login Settings
- Display Settings
- Sound Settings
- Advanced Settings
- Device Tab
- Device Tab: Basic Panel
- Device Tab: Display Panel
- Device Tab: microSD Card Panel
- Device Tab: Sounds Panel
- Device Tab: About Panel
- Device Tab: Log Panel
- WAN Tab
- WAN Tab: Setup Panel
- WAN Tab: 3G Panel
- WAN Tab: 4G Panel
- WAN Tab: 4G LTE Panel
- WAN Tab: GPS Panel
- Wi-Fi Tab
- Wi-Fi Tab: Network Panel
- Wi-Fi Tab: Security Panel
- Wi-Fi Tab: MAC Filter Panel
- Router Tab Settings
- Basic Panel: General
- Basic Panel: UPnP (Universal Plug and Play)
- Basic Panel: SPI (Stateful Packet Inspection)
- LAN Panel: General
- LAN Panel: DHCP
- LAN Panel: DNS Mode
- Port Forward Panel: General
- Port Forward Panel: Enabling Port Forwarding
- Port Forward Panel: Enabling Port Forwarding for an Application
- Port Forward Panel: Disabling Port Forwarding for an Application
- Port Trigger Panel: General
- Port Trigger Panel: Enabling Port Triggering
- Port Trigger Panel: Enabling Port Triggering for Specified Protocols and Ports
- Port Trigger Panel: Removing Ports From the Port Triggering List
- DMZ Panel: General
- DMZ Panel: Enabling DMZ
- DMZ Panel: Configuring DMZ
- Resetting the Software to Default Setting: General
- Resetting the Software to Default Settings: Using the Reset Button
- Resetting the Software to Default Settings: Using the Browser Interface
- Exporting and Importing Settings
- Device Logs
- Configuring the Wi-Fi Network
- Configuring 3G, 4G, and 4G LTE
- Location Services and Settings
- Using the microSD Card
- Frequently Asked Questions
- How Can I Tell I’m Connected to 3G or 4G?
- How Do I Connect to Wi-Fi?
- Is Roaming on 4G Supported?
- What Do I Do if I Forget the Wi-Fi Password?
- What Do I Do if I Forget the Administrator Password?
- What Do I Do if the Home Page Displays “Charging paused”?
- If the Connection is “Always On,” Am I Always Being Billed?
- Questions About GPS and Location Services
- Questions About WPS
- How Do I Access My Corporate Network Through a VPN?
- Are Terminal Sessions Supported?
- Tips
- Troubleshooting
- General Tips
- Connection Errors
- LCD Is Dark
- Insufficient Signal Strength
- Messages Displayed on the Device LCD
- Cannot Connect to Wi-Fi
- WPS-Related Messages
- WPS Failed. WPS could not add the device to the network
- WPS Not Available. WPS feature not enabled
- WPS Not Available. SSID Broadcast disabled
- WPS Not Available. Wi-Fi currently disabled
- WPS Not Available. WEP or WPA security not allowed
- WPS Not Available. Max connected devices
- WPS Not Available. MAC Filter list empty
- WPS PIN Chksum Error
- WPS PIN Mismatch. The PIN used did not match the PIN of the device
- WPS Timeout. The WPS session was terminated. Press WPS button to try again
- WPS Multiple Sessions Error
- Cannot Connect Through USB
- Cannot Display the Home Page
- Cannot Connect to the 3G or 4G Network
- The Device Seems to Have Stopped Charging
- Location Services Aren’t Working or Don’t Seem to Be Available
- GPS Fix Not Available
- Cannot Check for Updates
- Sounds Are Enabled, but the Device Doesn’t Generate Any Sounds
- Technical Specifications
- Safety Information
- Regulatory Notices
- Legal
- Index
Device Settings 107
Importing Settings
Exporting Settings
Settings include configuration information for the device, network, and browser interface.
You can, for example, save the current configuration, then make some changes and test them.
You can then use the Import button to restore (load) the saved configuration.
To export the settings to a text file:
1. Log in to the home page.
2. Click Advanced settings > Device > Basic.
3. Click Export.
Importing Settings
This feature lets you restore a saved configuration.
1. Log in to the home page.
2. Click Advanced settings > Device > Basic.
3. Browse to and click the file with the saved settings.
4. Click Import.
Note: Your device may reset, and you may need to reconnect to Wi-Fi and the Internet. (See
How Do I Connect to Wi-Fi? and Launching Your Network Connection.)
Device Logs
Learn how to configure settings related to the logging of events, export and clear logs.
Connection History
System Events
Setting the Method Used for Time Acquisition
Connection History
The connection history shows the time of connections to and disconnections from the Internet.
Note: The connection history does not log the amount of data transferred. In the Internet
Connection Information window, you can view information on the current billing cycle
and lifetime of the device. (See Internet Connection Information.)