User's Manual
Table Of Contents
- Table of Contents
- Get Started
- Device Basics
- Your Network Connection
- Browser Interface Home Page
- Home Page Basics
- Home Page Buttons
- Icons and Text
- Signal Information
- Mobile Broadband Information and Settings
- Roaming Information and Settings
- Alert Information
- GPS Information and Settings
- Wi-Fi Users Information and Settings
- Battery Information and Settings
- Internet Connection Information
- microSD Card Information and Settings
- Sounds Information and Settings
- Alerts
- Viewing Device Information
- Updates
- Device Settings
- Power Settings
- Login Settings
- Display Settings
- Sound Settings
- Advanced Settings
- Device Tab
- Device Tab: Basic Panel
- Device Tab: Display Panel
- Device Tab: microSD Card Panel
- Device Tab: Sounds Panel
- Device Tab: About Panel
- Device Tab: Log Panel
- WAN Tab
- WAN Tab: Setup Panel
- WAN Tab: 3G Panel
- WAN Tab: 4G Panel
- WAN Tab: 4G LTE Panel
- WAN Tab: GPS Panel
- Wi-Fi Tab
- Wi-Fi Tab: Network Panel
- Wi-Fi Tab: Security Panel
- Wi-Fi Tab: MAC Filter Panel
- Router Tab Settings
- Basic Panel: General
- Basic Panel: UPnP (Universal Plug and Play)
- Basic Panel: SPI (Stateful Packet Inspection)
- LAN Panel: General
- LAN Panel: DHCP
- LAN Panel: DNS Mode
- Port Forward Panel: General
- Port Forward Panel: Enabling Port Forwarding
- Port Forward Panel: Enabling Port Forwarding for an Application
- Port Forward Panel: Disabling Port Forwarding for an Application
- Port Trigger Panel: General
- Port Trigger Panel: Enabling Port Triggering
- Port Trigger Panel: Enabling Port Triggering for Specified Protocols and Ports
- Port Trigger Panel: Removing Ports From the Port Triggering List
- DMZ Panel: General
- DMZ Panel: Enabling DMZ
- DMZ Panel: Configuring DMZ
- Resetting the Software to Default Setting: General
- Resetting the Software to Default Settings: Using the Reset Button
- Resetting the Software to Default Settings: Using the Browser Interface
- Exporting and Importing Settings
- Device Logs
- Configuring the Wi-Fi Network
- Configuring 3G, 4G, and 4G LTE
- Location Services and Settings
- Using the microSD Card
- Frequently Asked Questions
- How Can I Tell I’m Connected to 3G or 4G?
- How Do I Connect to Wi-Fi?
- Is Roaming on 4G Supported?
- What Do I Do if I Forget the Wi-Fi Password?
- What Do I Do if I Forget the Administrator Password?
- What Do I Do if the Home Page Displays “Charging paused”?
- If the Connection is “Always On,” Am I Always Being Billed?
- Questions About GPS and Location Services
- Questions About WPS
- How Do I Access My Corporate Network Through a VPN?
- Are Terminal Sessions Supported?
- Tips
- Troubleshooting
- General Tips
- Connection Errors
- LCD Is Dark
- Insufficient Signal Strength
- Messages Displayed on the Device LCD
- Cannot Connect to Wi-Fi
- WPS-Related Messages
- WPS Failed. WPS could not add the device to the network
- WPS Not Available. WPS feature not enabled
- WPS Not Available. SSID Broadcast disabled
- WPS Not Available. Wi-Fi currently disabled
- WPS Not Available. WEP or WPA security not allowed
- WPS Not Available. Max connected devices
- WPS Not Available. MAC Filter list empty
- WPS PIN Chksum Error
- WPS PIN Mismatch. The PIN used did not match the PIN of the device
- WPS Timeout. The WPS session was terminated. Press WPS button to try again
- WPS Multiple Sessions Error
- Cannot Connect Through USB
- Cannot Display the Home Page
- Cannot Connect to the 3G or 4G Network
- The Device Seems to Have Stopped Charging
- Location Services Aren’t Working or Don’t Seem to Be Available
- GPS Fix Not Available
- Cannot Check for Updates
- Sounds Are Enabled, but the Device Doesn’t Generate Any Sounds
- Technical Specifications
- Safety Information
- Regulatory Notices
- Legal
- Index
Configuring the Wi-Fi Network 114
devices, and is recommended only if any of your devices don’t support WPA or
WPA2.
Shared WEP uses the same key for encryption and authentication; some consider
shared WEP to be less secure than open WEP.
WEP 64 Bit - Open — This option provides security, but it’s relatively weak. This
option works with older and newer Wi-Fi devices, and is recommended only if any of
your devices don’t support WPA or WPA2.
Open WEP uses the key for encryption, but not for authentication.
WEP 128 Bit - Open — This option provides security, but it’s relatively weak (but
stronger than WEP 64 Bit - Open). This option works with older and newer Wi-Fi
devices, and is recommended only if any of your devices don’t support WPA or
WPA2.
Open WEP uses the key for encryption, but not for authentication.
WPA-Personal TKIP — This is a strong security standard that is supported by most
Wi-Fi devices.
WPA-Personal TKIP/AES — This is a strong security standard that is supported by
most Wi-Fi devices.
WPA2-Personal AES — This is a stronger, newer security standard that is limited to
newer Wi-Fi devices.
WPA2-Personal TKIP/AES — This is a stronger, newer security standard that is
limited to newer Wi-Fi devices.
WPA/WPA2 Personal (recommended setting if any of your devices are more than
two years old) — Wi-Fi devices that use either WPA or WPA2 can connect to the
Sierra Wireless 4G LTE Tri-Fi Hotspot. Supported by most Wi-Fi devices.
4. Click Save.
The option you select determines the Wi-Fi security used and also the maximum length of the
Wi-Fi password.
Wi-Fi Password
If Wi-Fi security is enabled, a Wi-Fi password is required to connect to the Wi-Fi network.
To make your password more secure:
● Use letters and numbers
● Use special characters (for example, @)