User's Manual
Table Of Contents
- Table of Contents
- Get Started
- Device Basics
- Your Network Connection
- Browser Interface Home Page
- Home Page Basics
- Home Page Buttons
- Icons and Text
- Signal Information
- Mobile Broadband Information and Settings
- Roaming Information and Settings
- Alert Information
- GPS Information and Settings
- Wi-Fi Users Information and Settings
- Battery Information and Settings
- Internet Connection Information
- microSD Card Information and Settings
- Sounds Information and Settings
- Alerts
- Viewing Device Information
- Updates
- Device Settings
- Power Settings
- Login Settings
- Display Settings
- Sound Settings
- Advanced Settings
- Device Tab
- Device Tab: Basic Panel
- Device Tab: Display Panel
- Device Tab: microSD Card Panel
- Device Tab: Sounds Panel
- Device Tab: About Panel
- Device Tab: Log Panel
- WAN Tab
- WAN Tab: Setup Panel
- WAN Tab: 3G Panel
- WAN Tab: 4G Panel
- WAN Tab: 4G LTE Panel
- WAN Tab: GPS Panel
- Wi-Fi Tab
- Wi-Fi Tab: Network Panel
- Wi-Fi Tab: Security Panel
- Wi-Fi Tab: MAC Filter Panel
- Router Tab Settings
- Basic Panel: General
- Basic Panel: UPnP (Universal Plug and Play)
- Basic Panel: SPI (Stateful Packet Inspection)
- LAN Panel: General
- LAN Panel: DHCP
- LAN Panel: DNS Mode
- Port Forward Panel: General
- Port Forward Panel: Enabling Port Forwarding
- Port Forward Panel: Enabling Port Forwarding for an Application
- Port Forward Panel: Disabling Port Forwarding for an Application
- Port Trigger Panel: General
- Port Trigger Panel: Enabling Port Triggering
- Port Trigger Panel: Enabling Port Triggering for Specified Protocols and Ports
- Port Trigger Panel: Removing Ports From the Port Triggering List
- DMZ Panel: General
- DMZ Panel: Enabling DMZ
- DMZ Panel: Configuring DMZ
- Resetting the Software to Default Setting: General
- Resetting the Software to Default Settings: Using the Reset Button
- Resetting the Software to Default Settings: Using the Browser Interface
- Exporting and Importing Settings
- Device Logs
- Configuring the Wi-Fi Network
- Configuring 3G, 4G, and 4G LTE
- Location Services and Settings
- Using the microSD Card
- Frequently Asked Questions
- How Can I Tell I’m Connected to 3G or 4G?
- How Do I Connect to Wi-Fi?
- Is Roaming on 4G Supported?
- What Do I Do if I Forget the Wi-Fi Password?
- What Do I Do if I Forget the Administrator Password?
- What Do I Do if the Home Page Displays “Charging paused”?
- If the Connection is “Always On,” Am I Always Being Billed?
- Questions About GPS and Location Services
- Questions About WPS
- How Do I Access My Corporate Network Through a VPN?
- Are Terminal Sessions Supported?
- Tips
- Troubleshooting
- General Tips
- Connection Errors
- LCD Is Dark
- Insufficient Signal Strength
- Messages Displayed on the Device LCD
- Cannot Connect to Wi-Fi
- WPS-Related Messages
- WPS Failed. WPS could not add the device to the network
- WPS Not Available. WPS feature not enabled
- WPS Not Available. SSID Broadcast disabled
- WPS Not Available. Wi-Fi currently disabled
- WPS Not Available. WEP or WPA security not allowed
- WPS Not Available. Max connected devices
- WPS Not Available. MAC Filter list empty
- WPS PIN Chksum Error
- WPS PIN Mismatch. The PIN used did not match the PIN of the device
- WPS Timeout. The WPS session was terminated. Press WPS button to try again
- WPS Multiple Sessions Error
- Cannot Connect Through USB
- Cannot Display the Home Page
- Cannot Connect to the 3G or 4G Network
- The Device Seems to Have Stopped Charging
- Location Services Aren’t Working or Don’t Seem to Be Available
- GPS Fix Not Available
- Cannot Check for Updates
- Sounds Are Enabled, but the Device Doesn’t Generate Any Sounds
- Technical Specifications
- Safety Information
- Regulatory Notices
- Legal
- Index
Configuring the Wi-Fi Network 115
● Use both uppercase and lowercase letters
To change the Wi-Fi password:
1. Log in to the home page.
2. Click Advanced settings > Wi-Fi > Security.
3. In the Wi-Fi Password field, type the password; the maximum length depends on the
Wi-Fi security type that you’ve selected.
None — No security is used (no password is required to access the Wi-Fi network);
this setting is not recommended. Anyone may access your device and use your
Internet connection. (You are responsible for payment for data usage fees.)
WEP 64 bit - Shared — The password must be 5 ASCII characters.
WEP 128 bit - Shared — The password must be 13 ASCII characters.
WEP 64 bit - Open — The password must be 5 ASCII characters.
WEP 128 bit - Open — The password must be 13 ASCII characters.
WPA-Personal TKIP — The password must be 8 to 63 ASCII characters.
WPA-Personal TKIP/AES — The password must be 8 to 63 ASCII characters.
WPA2-Personal AES — The password must be 8 to 63 ASCII characters.
WPA2-Personal TKIP/AES — The password must be 8 to 63 ASCII characters.
WPA/WPA2 Personal — The password must be 8 to 63 ASCII characters.
4. Click Save.
Wi-Fi Password Reminder
To display the Wi-Fi password on the LCD of the device when the Wi-Fi Password Reminder
feature is enabled:
1. If the LCD is dark (no text or icons are displayed):
Make sure the LCD is enabled. (See Turning the LCD On or Off.)
Briefly press the power button on the device.
2. Press the navigation button on the device.
The information is displayed for approximately 20 seconds. To clear the information before that,
briefly press the power button on the device.