User's Manual
Table Of Contents
- Table of Contents
- Get Started
- Device Basics
- Your Network Connection
- Browser Interface Home Page
- Home Page Basics
- Home Page Buttons
- Icons and Text
- Signal Information
- Mobile Broadband Information and Settings
- Roaming Information and Settings
- Alert Information
- GPS Information and Settings
- Wi-Fi Users Information and Settings
- Battery Information and Settings
- Internet Connection Information
- microSD Card Information and Settings
- Sounds Information and Settings
- Alerts
- Viewing Device Information
- Updates
- Device Settings
- Power Settings
- Login Settings
- Display Settings
- Sound Settings
- Advanced Settings
- Device Tab
- Device Tab: Basic Panel
- Device Tab: Display Panel
- Device Tab: microSD Card Panel
- Device Tab: Sounds Panel
- Device Tab: About Panel
- Device Tab: Log Panel
- WAN Tab
- WAN Tab: Setup Panel
- WAN Tab: 3G Panel
- WAN Tab: 4G Panel
- WAN Tab: 4G LTE Panel
- WAN Tab: GPS Panel
- Wi-Fi Tab
- Wi-Fi Tab: Network Panel
- Wi-Fi Tab: Security Panel
- Wi-Fi Tab: MAC Filter Panel
- Router Tab Settings
- Basic Panel: General
- Basic Panel: UPnP (Universal Plug and Play)
- Basic Panel: SPI (Stateful Packet Inspection)
- LAN Panel: General
- LAN Panel: DHCP
- LAN Panel: DNS Mode
- Port Forward Panel: General
- Port Forward Panel: Enabling Port Forwarding
- Port Forward Panel: Enabling Port Forwarding for an Application
- Port Forward Panel: Disabling Port Forwarding for an Application
- Port Trigger Panel: General
- Port Trigger Panel: Enabling Port Triggering
- Port Trigger Panel: Enabling Port Triggering for Specified Protocols and Ports
- Port Trigger Panel: Removing Ports From the Port Triggering List
- DMZ Panel: General
- DMZ Panel: Enabling DMZ
- DMZ Panel: Configuring DMZ
- Resetting the Software to Default Setting: General
- Resetting the Software to Default Settings: Using the Reset Button
- Resetting the Software to Default Settings: Using the Browser Interface
- Exporting and Importing Settings
- Device Logs
- Configuring the Wi-Fi Network
- Configuring 3G, 4G, and 4G LTE
- Location Services and Settings
- Using the microSD Card
- Frequently Asked Questions
- How Can I Tell I’m Connected to 3G or 4G?
- How Do I Connect to Wi-Fi?
- Is Roaming on 4G Supported?
- What Do I Do if I Forget the Wi-Fi Password?
- What Do I Do if I Forget the Administrator Password?
- What Do I Do if the Home Page Displays “Charging paused”?
- If the Connection is “Always On,” Am I Always Being Billed?
- Questions About GPS and Location Services
- Questions About WPS
- How Do I Access My Corporate Network Through a VPN?
- Are Terminal Sessions Supported?
- Tips
- Troubleshooting
- General Tips
- Connection Errors
- LCD Is Dark
- Insufficient Signal Strength
- Messages Displayed on the Device LCD
- Cannot Connect to Wi-Fi
- WPS-Related Messages
- WPS Failed. WPS could not add the device to the network
- WPS Not Available. WPS feature not enabled
- WPS Not Available. SSID Broadcast disabled
- WPS Not Available. Wi-Fi currently disabled
- WPS Not Available. WEP or WPA security not allowed
- WPS Not Available. Max connected devices
- WPS Not Available. MAC Filter list empty
- WPS PIN Chksum Error
- WPS PIN Mismatch. The PIN used did not match the PIN of the device
- WPS Timeout. The WPS session was terminated. Press WPS button to try again
- WPS Multiple Sessions Error
- Cannot Connect Through USB
- Cannot Display the Home Page
- Cannot Connect to the 3G or 4G Network
- The Device Seems to Have Stopped Charging
- Location Services Aren’t Working or Don’t Seem to Be Available
- GPS Fix Not Available
- Cannot Check for Updates
- Sounds Are Enabled, but the Device Doesn’t Generate Any Sounds
- Technical Specifications
- Safety Information
- Regulatory Notices
- Legal
- Index
Browser Interface Home Page 63
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > About.
Note: 4G and 4G LTE information is not available if WAN Mode is “3G Only.” (WAN Mode is
in Advanced settings > WAN > Setup.)
The following information is displayed:
● Model Number — This is the manufacturer’s model of your device.
● Network Operator — This field shows the carrier that your device was activated with.
● Manufacturer — This is the company that made your device.
● Wi-Fi Firmware Version — This is the firmware version for the Wi-Fi access point of the
device.
● Software Version — This is the firmware version for the routing hardware of the device.
● Router PRI Version — This is the PRI version for the routing hardware of the device.
The PRI (Product Release Instructions) is a file that contains the settings used to
configure wireless products for a particular service provider, customer, or purpose.
● Wi-Fi MAC Address — This is the MAC address of the 4G module. Each wireless
device has a unique MAC address (assigned by its manufacturer).
● Activation — This field reflects whether 3G is activated.
● Reconditioned — This field indicates whether your device has been returned for service
or repair and reconditioned (if applicable).
● Total Bytes — This is the amount of data transferred over the 3G network during the
lifetime of the device.
● MDN (Mobile Directory Number) — This is a 10-digit phone number.
● ESN or MEID (3G).
The ESN (Electronic Serial Number) is the unique first-generation serial number
assigned to the 3G component of the device.
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number
assigned to the 3G component of the device.