User's Manual

Device Settings 70
AC Power Settings
You can specify the settings for AC power.
● Short Range — Choose this setting if you have a designated wireless area and you
need to minimize the effect of your network on other networks in the vicinity.
● Long Range — This setting allows you to use your wireless devices farther from your
Sierra Wireless 4G LTE Tri-Fi Hotspot but increases the possibility of interference with or
from nearby wireless networks.
To choose an option:
1. Make sure you’re logged in to the home page.
2. Click the battery icon . The Battery Information and Settings window opens.
— or —
Click Advanced settings > Wi-Fi > Network.
3. Select an option in the AC Powered section.
Login Settings
You can change the administrator password, and also enable automatic login.
Changing the Administrator Password.
Automatic Login (“Remember Me”).
Changing the Administrator Password
For security reasons, change the administrator password on a regular basis.
Note: If you forget the Admin Login password, you’ll need to reset the device to its default
settings and go through the device setup. (See What Do I Do if I Forget the
Administrator Password?)
1. Log in to the home page.
2. Click Advanced settings > Device > Basic.
3. In the Admin Password field, type the new password (1–20 letters, numbers, or
symbols).
Automatic Login (“Remember Me”)
For convenience, you can enable automatic login.
If you enable automatic login: