User's Manual

Note: Users of Windows 2000
must be logged in with adminis-
trative privileges. Users of
Windows XP may require admin-
istrative privileges.
Note: If you are running
Mac OS X, please refer to the
Watcher Quick Start Guide for
the Mac OS X 10.4.x found at
www.sierrawireless.com/mac
Installing the Software
3. Installing the 3G Watcher software
Note: If you are running Windows 2000, Windows Installer Redistrib-
utable 2.0 must be installed. This is available on the Microsoft web
site, www.microsoft.com.
Note: You may require your Windows CD.
1. If your package does not include an installation CD,
proceed to “5. TRU-Install” on page 25.
2. Insert the installation CD into your CD-ROM drive. The
CD should AutoRun and display a menu.
If the CD does not AutoRun, select
Start > Run and enter
d:\setup.exe where d is the drive letter of your CD-ROM
drive.
3. From the CD start-up menu, select your language, then
installation, and then click the link under software installation
to launch the installer.
4. Use the
Next and Back buttons to navigate through the
installer.
5. To close the CD start-up menu, click the
exit option in the
lower right corner of the window.
4. Inserting the AirCard USB modem
1. If the battery and the SIM card are not already inserted in
your AirCard modem, insert them. (See ”1. Inserting the
battery” and“2. Inserting the SIM card” on page 22.)
2. Insert the AirCard modem into the USB slot:
a. Slide the lever on the back of the AirCard modem in
the direction indicated by the triangle to release the
modem's USB connector.
Figure 2-7: USB connector
Rev 1.1 Aug.07 23