User's Manual

Chapter 5: Data Connections
Rev 1.0 Sep.01 29
Installation and Use
on Notebook PCs
QNC Connections
The QNC connection is set up for you when Watcher is
installed. All you need to do to make a QNC connection is:
1. Select
Quick 2NetSM (14.4 kbps) from the drop-down menu
on the Data tab of the main Watcher window.
2. Click the
Connect button.
Once connected you can use any Internet application (such as
Internet Explorer, Netscape Navigator, or your e-mail appli-
cation).
1xRTT High Speed Connections
When the 1xRTT indicator is on, the 1xRTT connection
is available to you.
To make a 1xRTT connection:
1. Select
Express Network 1xRTT from the drop-down menu
on the Data tab of the main Watcher window.
2. Click the
Connect button. (No phone number or dialing is
required.)
Note: Depending on your billing
plan, there may be a surcharge
for 1xRTT service.
Once the connection is established, you can use any Internet
application (such as Internet Explorer, Netscape Navigator, or
your e-mail application).