User guide

ALEOS User Guide
98 20080616
Misc
Figure 9-3: ACEmanager: GPS - Misc
Table 9-2: GPS: Misc
Command Description
Enable input event
reports
Enable sending input changes as events (different report types).
• n=0 : Disable
• n=1 : Enable
Odometer Enable Enable odometer reporting.
• n=0 : Disabled (default)
• n=1 : Enabled
Odometer Value
(meters)
The current odometer value of the AirLink Device. The value is in meters. Maximum value
is approximately 4.3 billion meters (2.5 million miles). 1 mile is approximately 1600 meters.
• n=meters
TAIP ID Sets/queries the TAIP ID. This ID is returned in TAIP reports if it has been negotiated with
the TAIP client. This value is only used in conjunction with TAIP emulation mode
(*PPGPSR=F0).
• nnnn=TAIP ID (4 characters)
Send SNF Buffer
imeediately on input
Flushes store and forward buffer when an input event (DTR/RTS) occurs.
• n=0 : Disable
• n=1 : Enable