User guide

ALEOS User Guide
106 20080616
Raven Line devices
If you are connected to a Raven line device, in addition to the fields above, more
sections will appear on the Serial Port Configuration page. The additional
sections are as follows:
• TCP
• UDP
• PPP/SLIP
• PASS THRU
• TELEMETRY- MODBUS
Assert DCD Assert DCD always, or when the device is in a data mode (UDP, TCP, etc.) or when the
device is in network coverage.
Enable CTS Assert CTS when there is network coverage.
DTR Mode Use DTR from serial device, or ignore DTR. (Same as S211).
Quiet Mode Disable or enable display of device responses.
AT Verbose Mode Configure AT command responses.
Call Progress Result
Mode
When enabled adds 19200 to CONNECT messages.
Convert 12 digit
Number to IP
Converts 12 digit number to an IP address 111222333444 -> 111.222.333.444.
DATZ When ON, +++ ATZ will NOT reset the device.
Table 10-1: Serial Port
Command Description