User guide

ALEOS User Guide

134 20080616

•SNMP - Using the SNMP settings in Common > Other, the report will be

included in the SNMP Trap.

• Events Protocol - The AirLink device will send out a report to the Reports

Server to allow an interface with a wider variety of applications.

• Report 7, Report 8, Report 9 - An additional destination for Email, SMS,

Relay, or Events Protocol.

For the message report types, Email, SMS, and Events Protocol, you will need to

select which data you would like included in the report.

•Report To - The email address where the report should be sent.

• Report Subject - The subject that should be displayed.

• Report Message - The message you want included with each report.

Note: You cannot send an Email with your AirLink device unless the Email server you

have configured allows your AirLink device as a relay host. Talk to your network adminis-

trator to ensure you can send email through the email server using your AirLink device.

SMS

•Report To - The cellular phone number where the report should be sent.

• Report Message - The message you want included with each report.

Note: You can only send SMS from your AirLink device if your cellular account allows

SMS. You may need to have SMS added to the account. SMS from data accounts is

blocked on some cellular networks.

Relay

The relay outputs on the AirLink device I/O port can be used to cause an external

action.

•1 - Relay 1 - Open

• 2 - Relay 1, Inverted - Closed

•3 - Relay 2 - Open

• 4 - Relay 2, Inverted - Closed

Tip:

The relays are capable of switching small loads. If you need a stronger signal, such

as to open some door locks, you can connect the AirLink device’s relay to a stronger

solenoid relay which has enough power to cause the desired effect.