User guide

Windows Dial-up Networking (DUN)
Rev 2.0 C Aug.10 157
Connecting to the Internet Using DUN
There are two methods you can use to connect with AirLink device to the Internet
using DUN, AceView and the Windows DUN connection directly.
ACEview
ACEview is a small utility which can maintain your DUN connection and monitor
the connection of your AirLink device to Provider. If you have not already installed
ACEview you can obtain the most recent version from the Sierra Wireless AirLink
website.
Note: The direct DUN
connection features of
ACEview are not available
in Windows 98 or Windows
NT.
This guide assumes you have a default installation of ACEview.
1. Start ACEview.
Start > All Programs > AirLink Communications > ACEview
Figure 1-29: ACEview: Menu
a. Right-click on the ACEview window to open the menu.
b. Select Connection Settings.
Figure 1-30: ACEview: Connection Settings
c. Select Auto Start in the DUN section.
d. Select Maintain Persistent Connection.
When checked, ACEview will continually check the DUN connection to ensure it is
not down. If so, ACEview will attempt to connect again.