User guide

ALEOS User Guide
206 20080616
USB
S53 This AT Command applies to:
• Destination Address
• Destination Port
• Default Dial Code
Destination IP address, port, and method. These are used as defaults for the
D (Dial) AT command.
• method= P : UDP
• method=T : TCP
• method=N : Telnet
• d.d.d.d=IP address or domain name
• ppppp=the port address
Examples:
ATS53=T192.168.100.23/12345
ATS53=foo.earlink.com
Telnet to the specified IP at port 12345.
ATS53=192.168.100.23/12345
Query the specified IP at port 12345.
ATS53=/12345
Query port 12345.
*NETALLOWZEROIP Allow Last Byte of net IP = Zero
Allows the displayed IP address in *NETIP to end in zero (ex. 192.168.1.0).
• n=0 : Do not allow.
• n=1 : Allow.
*NETPHONE? Phone Number
The device’s phone number, if applicable or obtainable.
*HOSTPAP Request PAP
Use PAP to request the user login and password during PPP negotiation on
the host connection.
n=0 : Disable PAP request (Default).
n=1 : Takes user login and password from Windows DUN connection and
copies to *NETUID and *NETPW.
Table 6-6: Common: Misc
Table 6-7: Common: USB
Command Description
USB Device Mode *USBDEVICE=n
This parameter alters the default startup data mode.