User guide

ALEOS User Guide
222 20080616
Misc
*PPSNFB Store and Forward Behavior. When *PPSNF=1, the type of Store and
Forward behavior is defined by:
• n=0 : Normal Store and Forward. Data is stored when the MP is out of
cellular coverage; when the MP is in coverage, data is sent to server as
soon as possible. This is the default form devices with RAP version 1.3
or lower.
• n=1 : Data sent only when polled. Data is stored until polled using the
Poll command sent by a server.
• n=2 : Grouped Reports. Data is stored until the desired minimum number
of reports (see *PPSNFM) has been stored. The data is then sent to the
server in groups with at least the specified number of reports.
*PPSNFM Store and Forward Minimum Reports. Specifies the minimum number of
reports that must be stored before they are forwarded to the server. The data
is then sent to the server in packets that contain at least this number of
reports.
• n=0-255
*PPMAXRETRIES Maximum number retries when in Simple Reliable Mode.
• n=0 : Disabled
• n=1-255 retries
Table 6-20: GPS: Server 1
Command Description
Table 6-21: GPS: Misc
Command Description
*PPMINTIME Specifies the minimum amount of time between reports generated due to
either the time interval (*PPTIME) or the distance interval (*PPDIST). This is
useful to limit network traffic and make more efficient use of bandwidth. This
can be used in conjunction with store and forward. The minimum value which
this setting can take depends on the policies of the carrier.
• n=0 : Disabled
• n=1-65535 seconds
*PPINPUTEVT Enable sending input changes as events (different report types).
• n=0 : Disable
• n=1 : Enable
*PPODOM Enable odometer reporting.
• n=0 : Disabled (default)
• n=1 : Enabled
*PPODOMVAL The current odometer value of the MP. The value is in meters. Maximum
value is approximately 4.3 billion meters (2.5 million miles). 1 mile is
approximately 1600 meters.
• n=meters