User guide

ALEOS User Guide
228 20080616
I/O
This group includes configuration commands for the digital and analog inputs and
relay outputs. Some of the values shown as a part of this group are not
changeable but reflect the current status. Only those devices with available inputs
and outputs will display this group.
*EVDODIVERSITY EV-DO Diversity allows two antennas to provide more consistent connection.
• n=0 : Disabled.
• n=1 : Allow
Note: If you are not using a diversity antenna, *EVDODIVERSITY should be
disabled.
*EVDODATASERV *PROVISION=MSL,MDN/MIN[,SID][,NID]
Tip: It is recommended to use the Setup Wizard for your carrier to provision
the device.
Provision the device with the lock code and phone number. Cannot
be configured in AceManager.
• MSL=master lockcode
• MDN/MIN=phone number
• SID=system ID
• NID=network ID
Table 6-24: CDMA
Command Description
Table 6-25: I/O
Command Description
*DIGITALIN1 Query individual digital inputs. The digital inputs report either a 0 (open) or 1
(closed).
• n=1-4 Input number
*DIGITALIN2
*DIGITALIN2
*DIGITALIN4
*ANALOGIN1 Query individual analog inputs. The analog inputs report the voltage in volts.
• n=1-4 Input number
*ANALOGIN2
*ANALOGIN3
*ANALOGIN4