User guide

Security Configuration
Rev 2.0 C Aug.10 67
Figure 7-4: ACEmanager: Security - Port Filtering-outbound
Trusted IPs - Inbound
Trusted IPs-Inbound restricts unsolicited access to the AirLink device and all LAN
connected devices.
Tip: Trusted IPs-Inbound was called Friends List in legacy AirLink products.
When enabled, only packets with source IP addresses matching those in the list
or range of trusted hosts will have unrestricted access to the AirLink device and/or
LAN connected devices.
Note: Inbound restrictions do not apply to responses to outbound data requests. To
restrict outbound access, you need to set the applicable outbound filter.
Command Description
Outbound Port
Filtering Mode
Allowed and blocked ports through which traffic is either allowed or blocked (respectively)
are listed.
Note: Outbound IP filter supports up to 9 ports.
Start Port The first of a range or a single port on the LAN.
End Port The end of the range on the LAN.