Integration Guide

4117336 Rev 1.0 May 18, 2015 11
Hardware Integration Guide
RF Specification
Table 6. Conducted RX Sensitivity 3GPP (BW: 10MHz) – LTE Bands (Note 1, 4)
Band
Standard (dBm)
(Note 2)
Room Typical
(dBm)
Class A (Extreme)
Typical (dBm)
(Note 5)
Class A Limit (
dBm) (Note 5)
B2
-94.3
-101
-100
-95.5
B4
-96.3
-101.5
-101
-97
B5
-94.3
-102.5
-102
-95.5
B7
-94.3
-100
-99
-95.5
B17
-93.3
-102
-101
-94.5
Note 1: Dual receiver (SIMO) Per 3GPP TS 36.521-1 Rx Sensitivity Specification.
Note 2: Per 3GPP Specification.
Note 3:Sensitivity values scale with bandwidth: x_MHz_Sensitivity = 10 MHz_Sensitivity - 10*log(10 MHz/x_MHz)
Note 4: 10 MHz BW,and 50 RB DownLink and Up Link as 3GPP TS 36.521-1 Table 7.3.5-2.
Note 5: Class A is defined in 3.3 Environmental
Note 6: The requirement is modified by -0.5 dB when the carrier frequency of the assigned E-UTRA channel bandwidth is
within 865-894 MHz.
3.2. WCDMA RF Interface
This section presents the WCDMA RF Specification for the AirPrime AirPrime AR7552 embedded
modules.
3.2.1. WCDMA Max TX Output Power
The Maximum Transmitter Output Power of the AirPrime AR7552 embedded module are specified in
the following table.
Table 7. AirPrime AR7552 Maximum WCDMA Transmitter Output Power
Band
Frequency Band
Nominal Max TX Output
Power
Tolerance
II (1900/PCS)
1850 MHz to 1910 MHz
+23.5 dBm
+2.2/-2.7 dB
V (850/CELL)
824 MHz to 849 MHz
3.2.2. WCDMA RX Sensitivity
The Minimum Receiver Sensitivity of the AirPrime AR7552 embedded module are specified in the
following table.
Table 8. AirPrime AR7552 Minimum WCDMA Receiver Sensitivity
Band
Frequency Band
Minimum RX Downlink
Criteria
II (1900/PCS)
1930 MHz to 1990 MHz
-106 dBm (Class A)
-105 dBm (Class B)
BER < 0.001
V (850/CELL)
869 MHz to 894 MHz
-107 dBm (Class A)
-106 dBm (Class B)