AirPrime Module Datasheet

Product Technical Specification
Rev 1 Apr.17 32 41110693
Canada IC
The BC127/BC127-HD/BC127-EXT module, upon commercial release, will have
been granted modular approval by IC. Integrators may use the BC127/BC127-HD/
BC127-EXT module in their end products without additional IC certification if the
following conditions are met.
• At least 20 cm separation distance between the antenna and the user’s body
must be maintained at all times.
• The BC127/BC127-HD/BC127-EXT module must not be collocated with any
other transmitter within a host device.
• The regulatory label on the end product must include the text “Contains IC :
11012A-BC11X” and the following compliance statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Bluetooth Qualification Program (BQP)
• In case no other non-certified Bluetooth components are incorporated, the
BC127/BC127-HD/BC127-EXT's BQP marking certification allows users to
integrate the module into products without the need to obtain subsequent and
separate approval.
• The BC127/BC127-HD/BC127-EXT has been approved by the Bluetooth
Qualification Body (BQB) to use the Bluetooth trademark and to offer official
Bluetooth functionality. The approval according to the V4.0B Bluetooth speci-
fication confirms that the module complies with the Bluetooth specification
and will successfully operate with other products supporting the same profile.
BQP certification also ensures that the module has gone through safety
assessment. This certification was granted through a combination of product
performance testing and interoperability testing. This certification applies
globally.
Labelling
• Products complying with all relevant requirements are allowed to bear the
official Bluetooth logo
For further information regarding the BQP certification requirements please
review the following websites:
Bluetooth Special Interest Group:
https://www.bluetooth.org/apps/content/