Network Router User Manual

SNMP : Simple Network Management Protocol
Rev 3.0B Feb.08 104
SNMP Configuration
ToconfigureyourPinPoint‐EtoworkasanSNMPagent,you
canuseeitherAceManager,oraterminalconnectionto
configurethemodemusingATcommands.InAceManager,
theSNMPcommandsareallpartoftheOthergroupunderthe
Commongroup.
ThereareonlythreecommandstosetforSNMPinthe
PinPoint‐E:thelisteningport,thesecuritylevel,andthetrap
destination.
Figure 10-1: AceManager : Common > Other
Listening Port
*SNMPPORTsetstheportfortheSNMPagenttolistenon.Ifset
tozero,default,SNMPisdisabled.
Tip: SNMP generally uses port 161, however most Internet providers
(including cellular) block all ports below 1024 as a security measure.
You should be able to use a higher numbered port such as 10161.
Security Level
*SNMPSECLVLsetsthesecuritylevelandwhichversionof
SNMPcommunicationsareused.
• 0‐Nosecurityrequired.SNMPv2candSMNPv3commu‐
nicationsareallowed.
• 1‐Authenticationrequired.SNMPv3isrequiredtodo
authenticationandSNMPv2ctransmissionswillbesilently
discarded.AuthenticationisequivalenttotheauthNoPriv
settinginSNMPv3.
• 2‐Authenticationrequiredandmessagesareencrypted.
SNMPv3isrequiredtodoauthentication.SNMPv2cand
SNMPv3authNoPrivtransmissionswillbesilently
discarded.Authenticationandencryptionisequivalentto
theauthPrivsettinginSNMPv3.