Network Router User Manual

Configuration Commands
Rev 3.0B Feb.08 122
*NETPW=pw
Thepasswordthatisusedtolog in tothecellularnetwork,
whenrequired.
• pw=password(30charactersmaximum)
*NETPHONE?
Themodem’sphonenumber,ifapplicableorobtainable.
*NETROAMPREF=n
Allowconfigurationoftheroamingpreference.
• n=0:Restricttohomenetworkonly.
• n=1‐3:Allowroamingtoaffiliatednetworks.
• n=3
Whenthevalueissetto3,itissetto:
Automatic‐B,(Non‐preferredsystem):Attempttoacquire
systemslistedinPRL;ifnomatch,searchforavailableB‐band
cellularcarrier
• n=1
Whenthevalueissetto1,itissetto:
Automatic,(Preferredsystem):AcquiresystemslistedinPRL
only.
Note: As always there will be additional charges for roaming to a
different network.
*NETUID=uid
Theloginthatisusedtologintothecellularnetwork,when
required.
• uid=userid(upto64bytes)
*PRLDIAL=n
UpdatethePRLbycontactingyourcellularcarrier.
• n=0:Disabled
• n=1:UpdatePRL.
*STATICIP=d.d.d.d
SetthestaticIPrequiredtobereceivedfromthenetwork.Ifthe
modemdoesnotgetthisIPaddressfromthenetwork,itwill
resettheinternalhardwa reandtryagain.Thedefaultis0.0.0.0,
whichallowsanyIPaddressfromthenetwork.
• d.d.d.d=IPaddress