Network Router User Manual

PinPoint-E EV-DO
153 20070914
n=2:GroupedReports.Dataisstoreduntilthedesired
minimumnumberofreports(see*PPSNFM)hasbeen
stored.Thedataisthensenttotheserveringroupswithat
leastthespecifiednumberofreports.
*PPSNFM=n
StoreandForwardMinimumReports.Specifiestheminimum
numberofreportsthatmustbestoredbeforetheyare
forwardedtotheserver.Thedataisthensenttotheserverin
packetsthatcontainatleastthisnumberofreports.
n=0255
*PPSNFR=n
StoreandForwardReliability:GPSreportswillberetrans
mittedifnotacknowledgedbytheserver.
n=0:Disabled
n=1:ReliablemodeenabledforRAPmessages
n=2:Simplereliablemode
*PPTAIPID=nnnn
Sets/queriestheTAIPID.ThisIDisreturnedinTAIPreportsif
ithasbeennegotiatedwiththeTAIPclient.Thisvalueisonly
usedinconjunctionwithTAIPemulationmode(*PPGPSR=F0).
nnnn=TAIPID(4characters)
*PPTCPPOLL=n
SpecifiestheporttolistenonforTCPGPSreportpolling.The
requesttothisportneedstocomefromthesameIPaddressin
*PPIP.
n=0:Disabled
n=165535(default9494)
*PPTIME=n
GPSReportTimeInterval.Seealso*PPMINTIME,*PPTSV,
+CTA.
n=seconds(1‐65535)
Note: Your cellular carrier may
impose a minimum transmit time.
Caution: A report time of less than 30 seconds can possibly keep an
RF link up continuously. This will eventually cause the PinPoint-E to
overheat and shutdown. An RF resource may continue be tied up to
transfer small amounts of data. Generally the RF channel will be
released and go dormant in 10-20 seconds of no data sent or
received.