Network Router User Manual

Activating your PinPoint-E on the Verizon Network

Rev 3.0B Feb.08 24

e. ClickNexttostarttheWizardprocess.

2. Wizard: Connecting to the Modem

IfyouconnectedyourPinPoint‐Etotheportonyour

computer,selectConnectedtoanEthernet/USBPortandusethe

dropdownmenutoselecttheEthernetadapterorUSB/net

connectiononyourcomputertowhichthemodemisconnected

(mostcomputersonlyhaveoneadapterwhichwillbeselected

for

you).Thedefaultpasswordforthemodemisenteredfor

you.ClickNext.

Note: If you want to use USB with the Setup Wizard you will need to

first install the driver, refer to Installing the USB driver section in this

Chapter.

Figure 3-2: Setup Wizard : Ethernet Connection

Figure 3-3: Ethernet Port

Tip: If the Setup Wizard is unable to detect the PinPoint-E, check the

green link LED on the Ethernet port of the modem to see if it is lit to

indicate an Ethernet connection with your computer. If you do not see

this light or if your computer shows a “Network Cable Unplugged”

message or icon, try a different Ethernet cable.