Network Router User Manual

PinPoint-E EV-DO
31 20070914
methodisrecommendedonlyinsituationswheretheSetup
Wizardisnotavailableand/orwhentheconfigurationforthe
PinPoint‐Eisunusual.
Caution: It is not possible to activate the PinPoint-E using either
AceManager or AceNet.
1. Settelnettimeoutinto20minutes.
AT*TELNETTIMEOUT=20
2. Savethetelnetsetting.
AT&W
3. VerifyALEOShasestablishedcommunicationtothe
internalhardware.
ATI3
4. Entertheactivationcommandappropriateforyourtypeof
account.TheSIDandNIDareoptionalandonlyrequired
ifyouraccounttypeusesthem.
· IfyouhavethesamenumberfortheMINandMDNor
MSID:
AT*PROVISION=MSL,MDN[,SID,NID]
· IfyouhavethedifferentnumbersfortheMINandMDN
orMSID:
AT*PROVISION2=MSL,MDN,MIN/MSID[,SI D,N I D]