User guide

WA_DEV_GL6100_PTS_001 Rev 002 May 24, 2010 68
GL61x0 Product Technical
Specification and User Guide
Power Consumption
12.4.2.2. Equipment Configuration
The communication tester is set according to the GL61x0 operating mode. Paging during idle modes,
Tx burst power, RF band and GSM/DCS/GPRS may be selected on the communication tester.
Refer to the following table for the network analyzer configuration according to operating mode.
Table 50: Operating Mode Information
Operating Mode
Communication Tester Configuration
Alarm Mode
N/A
Active Idle Mode
Paging 9 (Rx burst occurrence ~2s)
Paging 2 (Rx burst occurrence ~0,5s)
Sleep Idle Mode
Paging 9 (Rx burst occurrence ~2s)
Paging 2 (Rx burst occurrence ~0,5s)
Active Mode
N/A
Sleep Mode
N/A
Connected Mode
850/900 MHz
PCL5 (TX power 33dBm)
PCL19 (TX power 5dBm)
1800/1900 MHz
PCL0 (TX power 30dBm)
PCL15 (TX power 0dBm)
GPRS
Transfer Mode class 8
(4Rx/1Tx)
850/900 MHz
Gam.3 (TX power 33dBm)
Gam.17 (TX power 5dBm)
1800/1900 MHz
Gam.3 (TX power 30dBm)
Gam.18 (TX power 0dBm)
Transfer Mode class 10
(3Rx/2Tx)
850/900 MHz
Gam.3 (TX power 33dBm)
Gam.17 (TX power 5dBm)
1800/1900 MHz
Gam.3 (TX power 30dBm)
Gam.18 (TX power 0dBm)