User guide

WA_DEV_GL6100_PTS_001 Rev 002 May 24, 2010 80
16. Embedded Peripherals
This section enumerates the peripherals embedded within the GL61x0.
16.1. I/O Connector
The I/O connector applied on board is an 8-pin Micro-Fit connector. The connector information is
listed in the table below.
Table 63: 8-pin Micro-Fit Connector
Supplier
Description
Vendor Part
Number
Molex
3.00mm Pitch Micro-Fit 3.0™ Header, Surface Mount
Compatible, Dual Row, Right Angle, with Snap-in Plastic
Peg PCB Lock, 8 Circuits, Tin (Sn) Plating, Glow Wire
Compatible
430450800
16.2. SIM Card Socket
The recommended SIM connector to use with the GL61x0 is described in the table below.
Table 64: Recommended SIM Card Socket
Manufacturer
Description
Order Number
KYOCERA
6 Positions, With (15.54mm Pitch) Boss, Without Lock
04 5036 006 299 862+