User Manual
35
Useful Information
9 Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
10 Click [Yes, I agree to the provisions above and wish to
continue!] and click [Next].
11 Select the settings and click [Next].
l [Reinstall Windows to the whole Hard Disk to factory default.]
Select this option when you want to reinstall Windows to the factory
default. After reinstallation, you can create a new partition. For how to
create a new partition, refer to “To change the partition structure”
(è page 29).
l [Reinstall to the rst 2 partitions.]
*1
Select this option when the ash memory has already been divided into
several partitions. For how to create a new partition, refer to “To change
the partition structure” (è page 29).
You can keep the partition structure.
*1
This does not appear if Windows cannot be reinstalled to the recovery
partition and the area usable by Windows.
12 At the conrmation message, click [YES].
Reinstallation starts according to the instructions on the screen. (It will take
approximately 50 minutes.)
l Do not interrupt reinstallation, for example by turning off the computer or
pressing , and + (Del). Otherwise reinstallation may be-
come unavailable as Windows may not start up or the data may be
corrupted.
13
Remove the Product Recovery DVD-ROM, and then
click
[OK]
to turn off the computer, then remove the DVD drive.
14 Turn on the computer.
l If the password is requested, enter the Supervisor Password.
15 Perform the steps 3 to 5 for setting up the computer
(è pages 26 and 29).
16 Start the Setup Utility to change the settings as necessary.
17 Perform Windows Update.
U1mk2.5_OI_XP7.indb 35 2011/07/06 17:55:38