User Manual

43
Troubleshooting
n Display
<Only for model
with GPS>
The cursor cannot
be controlled prop-
erly.
l Operate the following steps.
A
Set [GPS] to [Disabled] in the [Advanced - Serial
Port Conguration] of the Setup Utility.
B
Press
+ (F10) and select [Yes] at the conrma-
tion message, and press (Enter).
The computer will restart.
C
Log on to Windows as an administrator.
D
Click (Start) and input “c:\util\drivers\gps\GPS.reg”
in [Search programs and les], and press (Enter).
E
Click [Yes], click [Yes] and click [OK].
Then Restart the Computer.
F
Press
+ (F2) while [Panasonic] boot screen is
displayed.
G
Set [GPS] to [Enabled] in the [Advanced - Serial
Port Conguration].
H
Press
+ (F10) and select [Yes] at the conrma-
tion message, and press
(Enter).
The cursor can not
be displayed at the
right position.
l When using application software displaying a unique
cursor (i.e. Paint), note the following restrictions.
 The cursor unique for the application software is not
enlarged.
 The cursor unique for the application software may
not be displayed at the right position. Conrm the op-
eration position using the Windows cursor (enlarged
cursor when zoomed).
n Touchscreen
The cursor does not
work.
l When using the external mouse, connect it correctly.
l Restart the computer using the keyboard.
Press (Windows) and press two times, and press
to select [Restart] and press (Enter).
Press (Windows), and to select [Restart].
l If the computer does not respond to keyboard com-
mands, read “No response.” (è page 45).
Cannot input using
the touchscreen.
l Set [Touchscreen Mode] to [Auto] or [Tablet] in the
[Main] menu of the Setup Utility.
U1mk2.5_OI_XP7.indb 43 2011/07/06 17:55:40