AirPrime and HL7548 AT Commands Interface Guide Rev10 0

4116303 Rev 10.0 August 10, 2017 35
3. General AT Commands
3.1. I Command: Request Identification
Information
HL7518 and HL7548
Execute command
Syntax
ATI[<value>]
Response
If <value> = 0 or omitted:
<model>
OK
If <value> = 1:
<short version name>
OK
If <value> = 3:
<version tag>
OK
If <value> = 4:
<fuse state>
OK
If <value> = 9:
<version name>
<model>
<short version name>
<chipset>
<fuse state>
<build date & time>
<source rev>
OK
If <value> =10:
Modem-Firmware:
<version name>
<model>
<short version name>
<chipset>
<fuse state>
<build date & time>
<source rev>
Primary-Boot:
<version name>
<build date & time>
<source rev>