AirPrime IoT Module Technical Specification Rev9 0

4115834 Rev 9.0 August 28, 2017 4
Product Technical Specification
Document History
Version
Date
Updates
1.0
May 30, 2014
Creation
June 05, 2014
• Indicated that PCM pads are not available in Table 6 Pad
Definition
• Updated:
▪ Table 6 Pad Definition
▪ Figure 3 Pad Configuration
▪ Table 20 Trace Debug Pad Description
▪ Section 5.6 ESD Guidelines for USB
Removed:
• ADC
• section 5.6 Antenna Integration with Detection Circuit (due to the
removal of ADC)
June 16, 2014
Updated:
• 1.8.2 Regulatory
• 3.10 POWER-ON Signal (PWR_ON_N)
• 5.1 Power-Up Sequence
• 5.2 Module Switch-Off
• 7 FCC Legal Information
Added 5.3 Emergency Power OFF
September 16, 2014
Updated:
• 3.10 POWER-ON Signal (PWR_ON_N)
• 3.11 Reset Signal (RESET_IN_N)
• 5.1 Power-Up Sequence
• 5.2 Module Switch-Off
September 26, 2014
Updated:
• 2 Pad Definition
• 3.5 SIM Interface
• 3.13.1 Trace Debug
1.1
October 06, 2014
Removed unsupported AT commands throughout the document.
Updated Table 8 Current Consumption
1.2
November 10, 2014
Updated:
• Table 2 General Features
• Table 8 Current Consumption
December 01, 2014
Updated:
• 2 Pad Definition
• Table 9 VGPIO Electrical Characteristics
• Figure 10 EMC and ESD Components Close to the SIM
Deleted section 6 X-Ray Exposure
1.3
December 05, 2014
Updated Figure 3 Pad Configuration
1.4
January 08, 2015
Updated:
• 1.7 ESD
• The note in section 3.2 Current Consumption