User's Manual

12.
Align the contact edge of the new Wireless WAN Card with the corresponding socket contact of the
computer.
13.
Pivot the card until you can snap it into place by pressing the upper side of the connectors; then secure
the card with the two screws. Reattach the antenna, and connect the cables to the new card.
Note:
Depending on the system configuration of your computer, the card may have only one
connector.
14.
Replace the upper case and push the middle top part of the upper case into place until you hear it click;
then turn the machine over and tighten the screws you have removed in step 6.
15.
If your computer has a fingerprint reader, reattach the fingerprint reader cable.
16.
Reinstall the keyboard
.
17.
Reinstall the battery
.
18.
Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on.
3/3 ページReplacing the PCI Express Mini Card for wireless WAN connection
2007/03/08file://C:\TamaTemp\replwan.htm\replwan.htm